Bently Nevada 288055-01 3500/22M Standard Transient Data Interface Module

The Bently Nevada 288055-01 3500/22M Standard Transient Data Interface Module is a crucial component of the 3500 series monitoring system designed for continuous monitoring and diagnostics of industrial machinery. This module interfaces with the System 1® machinery management software, providing real-time data collection, including both steady-state and transient waveform data, and transmitting it via Ethernet to the host software.

Key Features:

• Collects real-time data, including transient and steady-state waveforms, for diagnostics and predictive maintenance.
• Supports communication via Ethernet, RS232, and Fiber-Optic Ethernet interfaces (10 Base-T, 100 Base-TX, 100 Base-FX).
• Enables connection with Bently Nevada 3500 series monitors (such as 3500/40M, 3500/42M) for integrated monitoring solutions.
• Includes optional Channel Enabling Disk for capturing dynamic or transient data, with support for up to 672 channels.
• Fully compatible with Bently Nevada System 1® for asset management and data collection.

Applications:

• Ideal for predictive maintenance, condition monitoring, and diagnostic analysis of rotating machinery, including turbines, compressors, pumps, and other high-speed equipment in industries like power generation, oil and gas, and manufacturing.

General Info

• Manufacturer: Bently Nevada (a division of Baker Hughes)
• Model Number: 288055-01
• Type: Standard Transient Data Interface Module
• Number of Channels: Up to 672 (depends on configuration with optional Channel Enabling Disk)
• Output Signal Type: Ethernet, RS232, and Fiber-Optic Ethernet
• Compatibility: Compatible with Bently Nevada 3500 series monitoring systems (3500/40M, 3500/42M) and System 1® machinery management software.

Features:

• Real-Time Data Collection: Provides continuous, high-speed data collection of both steady-state and transient data, crucial for accurate diagnostics of machinery conditions.
• Ethernet and Fiber Optic Communication: Offers flexible communication options (10 Base-T, 100 Base-TX, 100 Base-FX) for seamless integration into existing monitoring networks.
• Dynamic Data Capture: Optional Channel Enabling Disk for capturing dynamic or transient data based on machine conditions, allowing for enhanced monitoring.
• Modular Integration: The 3500/22M occupies a single slot in the 3500 series rack and integrates easily with other modules for a comprehensive monitoring system.
• Advanced Diagnostics: Provides support for diagnostics and predictive maintenance by capturing detailed data and allowing for real-time analysis.

Technical Specifications:

Electrical Specifications:

• Power Consumption: 10.5 Watts
• Operating Voltage: 18V to 32V DC
• Communication Ports:
  • RS232: 115.2 kbaud maximum
  • Ethernet (10 Base-T/100 Base-TX): Auto-sensing, standard Ethernet
  • Fiber-Optic Ethernet (100 Base-FX): Fiber-optic communication for extended distances.

Mechanical Specifications:

• Dimensions: 243.1 mm (Height) x 24.4 mm (Width) x 99.1 mm (Depth)
• Weight: 0.91 kg (2.0 lbs)
• Mounting: 1 full-height front or rear slot in the 3500 rack.

Environmental Specifications:

• Operating Temperature: -30°C to +65°C (-22°F to +150°F)
• Storage Temperature: -40°C to +85°C (-40°F to +185°F)
• Humidity: 95% non-condensing

Data Collection:

• Waveform Sampling Rates:
  • 1024 samples/rev for 2 revolutions
  • 512 samples/rev for 4 revolutions
  • 256 samples/rev for 8 revolutions, and others.
• Keyphasor® Inputs: Supports up to four Keyphasor® signals, typically used for speed and time interval data collection.
• Synchronous and Asynchronous Data: Simultaneous data sampling in both modes.

Communication Interfaces:

• BN Host Protocol: Ethernet TCP/IP for communication with 3500 Configuration Software and other 3500 monitoring systems.
• BN TDI Protocol: For integration with Bently Nevada System 1® asset management and data collection software.

Compliance and Certifications:

• CE Mark: Compliant with CE directives for electromagnetic compatibility (EMC).
• Safety Compliance: Compliant with EN61000-6-4 (Radiated Emissions) and EN61000-6-2 (Electromagnetic Immunity).
• Environmental Compliance: RoHS, CE, and UL compliant.
• Hazardous Area Approvals: CSA/NRTL/C, ATEX-certified for use in Zone 2, Class I Division 2 hazardous areas.